What Is Your IDEA

We are All in one solution to Build your Magical Props
CONTACT US
Please or Register to create posts and topics.

Wood filament Chop Cup

Is it possible to print a chop cup in one piece using a wood like filament, and add the magnet during the print?

Sure can do,

I have used 7x2 mm magnets to go into the cup, you will need to pause the print anywhere during the larger cavity start to show up (see 2nd pic)

also avoid steel nozzles, use brass and apply quick hold glue while pausing.

Cup does not nest with other similar cups due to wood filament needs a thicker wall.

contact us for non wood nestableĀ  plastic chop cups

Uploaded files:
  • Capture.JPG
  • Capture1.JPG

attached is the stl file https://emadgic.com/wp-content/uploads/2022/06/CHOP-CUPS.zip

assembly is quite challenging. you need

7x2 mm magnets

you will need to pause the print sometime during the larger top magnet cavity (see previous pic)

avoid steel nozzles,

apply hot glue to magnet to cupĀ  while pausing.

Cup does not nest with other similar cups . The nested cups optionĀ  will be added in the shop catalog

hope this helps

Uploaded files:
  • image_6487327.JPG
Scott Peckham has reacted to this post.
Scott Peckham